|
|
Step 2: Position
the decal and apply a piece of masking tape along the top edge of the
decal. This will be used to
create a hinge. Step 5: Now
start to pull the application tape off.
Pull the tape back at a 180 degree angle being careful not to pull
the decal off.
Step 1: Start by cleaning the surface you
will be applying the decal on. Decals can be applied to almost any
flat surface.
Step 3: Using
this hinge, flip the decal up and slowly peel off the backing. Watch to
make sure all the decal is releasing from the backing. (Be careful not to let the decal touch the window before you
are ready.
Step 4: At
this time use a credit card or something flat and start to apply pressure
to the decal at about a 45 degree angle.
Start in the center of the decal and work your way to the edges.
Once you are done with this go over the decal one more time, making
sure you have pressed all of the decal down good.
